The juices we are most interested in are grape (for wine) and apple (for cider). These are available in most countries. Unfortunately, the presentation (packaging, labelling) varies considerably, to conform to shoppers' expectation and also to comply with local consumer-protection regulations. We need to decipher the label to extract two vital pieces of information: Does the juice contain preservatives? How much sugar is present?
Preservatives first: Some manufacturers make a virtue of stating 'no preservatives' or words to that effect. This is helpful, but there is no legal obligation to make that statement. After all, you wouldn't expect to see a claim of 'no cyanide' just because none had been added. Also, 'preservatives' might be listed as 'stabiliser' or 'anti-oxidant', or it might say 'contains sulphites'. All are to be avoided as they will inhibit fermentation. Sometimes you will see 'with added vitamin C'. This does no harm though it is unnecessary. Ideally, you are looking for pure fruit juice with nothing added. Most juices are diluted concentrates and will have been pasteurised to stabilise them. We can live with that.
Sugar content: This information should be available but sometimes has to be decoded from the label. In Europe and the Middle East it is usually presented as grams per 100 ml (so multiply by 10 to convert to the standard g/l). In America, they often quote grams per serving, where a serving is 8 fluid ounces = 240 ml (so multiply by 4.2 for g/l). To further complicate matters, sometimes the label only quotes 'total carbohydrates' in grams /100 ml. In which case, it is safe to assume that 90 to 95% of the total carbs are sugar.
Also on the label: Some naturally unsweet juices like cranberry or grapefruit might contain artificial sweeteners. Though these will not prevent fermentation of the real sugars (including any you might add), they do not themselves ferment and would still be present in the finished wine or cider where you might find them rather intrusive.
Getting started
Beer, Wine or Cider?
Let's suppose you are a complete beginner. You've decided you would like to make your own plonk but you're not sure where to sta...
29 April 2020
23 April 2020
Paraglider's simple wine
This is the easiest and most reliable way to make a perfectly acceptable 'vin ordinaire'. It won't win any prizes but it will taste, smell and look like the 'real' article. We're making fresh, dry table wine, red or white, around 12.5% ABV. It contains no additives or preservatives and requires no special equipment. It takes about 4 weeks to make. Yes, I know there are websites shouting "Wine in one week!" They are rubbish, believe me!
Here we go. You will need:
Your grape juice should be kept at room temperature, not in the fridge. If you have placed your grape juice in the fridge, take it out and let it warm to room temperature before proceeding.
Drink the 5 litres of water (!) Most people prefer to do this over a few days. When the bottle is empty, there is no reason to rinse it out. It was full of drinking water, remember?
Day 1:
When the bubbling has stopped (or at least slowed to the occasional bubble), place the bottle in the fridge (not the freezer!) and leave it for about three days. The cold will halt the fermentation and help the yeast settle to the bottom of the bottle.
After three days refrigeration, line up enough empty bottles to hold the wine. I use 1-litre plastic lemonade bottles. Very, very carefully, so as not to disturb the sediment, pour the wine into the empty bottles using the funnel. It helps to have someone else hold the bottles and move the funnel from bottle to bottle. Fill all the bottles in a single pass, without untipping the fermenting bottle. This way, you won't disturb the sediment. Cap the bottles and store in a cool dark place.
The wine can be drunk straight away, but it will improve in the bottle for several months. It's best not to consider 'laying it down' or any such nonsense. It's not that sort of wine.
Here we go. You will need:
- One 5-litre plastic drinking water container (not five separate bottles)
- One 2-litre plastic coke bottle, empty
- One plastic pouring funnel
- Four 1-litre cartons of red or white grape juice with no preservatives
- 500 grams granulated white sugar
- One sachet of general-purpose wine yeast
Your grape juice should be kept at room temperature, not in the fridge. If you have placed your grape juice in the fridge, take it out and let it warm to room temperature before proceeding.
Drink the 5 litres of water (!) Most people prefer to do this over a few days. When the bottle is empty, there is no reason to rinse it out. It was full of drinking water, remember?
Day 1:
- Pour about half of your first carton of grape juice into the empty 5-litre bottle.
- Add half a teaspoonful of wine yeast, put the screw-cap on the bottle and shake it to mix in the yeast and aerate the juice.
- Leave the 5-litre bottle in a warmish place, but not in direct sunlight.
- The 5-litre bottle will have started bubbling. Add the rest of the first carton of juice and one more full carton. The 5-litre bottle is still under half full. Tighten the bottle cap then back it off half a turn. This is very important. Fermentation produces a lot of carbon dioxide gas which must be allowed to escape.
- Pour 500 grams granulated sugar into the empty 2-litre coke bottle. A plastic funnel makes this a lot easier. Pour cool boiled tap water or drinking water onto the sugar until the bottle is about half full (1 litre). Shake it until all the sugar is dissolved. Don't add it to the wine yet.
- Add one more carton of grape juice and all of the sugar syrup to the 5-litre bottle. The level should still be below the shoulder of the bottle. Swirl the bottle to mix in the sugar syrup.
- Tighten the bottle cap then back it off half a turn, as before.
- The liveliest fermentation should have eased off, so it's safe to add the last carton of juice, filling the 5-litre bottle to the bottom of the neck.
- Tighten the bottle cap then back it off half a turn.
When the bubbling has stopped (or at least slowed to the occasional bubble), place the bottle in the fridge (not the freezer!) and leave it for about three days. The cold will halt the fermentation and help the yeast settle to the bottom of the bottle.
After three days refrigeration, line up enough empty bottles to hold the wine. I use 1-litre plastic lemonade bottles. Very, very carefully, so as not to disturb the sediment, pour the wine into the empty bottles using the funnel. It helps to have someone else hold the bottles and move the funnel from bottle to bottle. Fill all the bottles in a single pass, without untipping the fermenting bottle. This way, you won't disturb the sediment. Cap the bottles and store in a cool dark place.
The wine can be drunk straight away, but it will improve in the bottle for several months. It's best not to consider 'laying it down' or any such nonsense. It's not that sort of wine.
20 April 2020
Paraglider's simple beer
In ex-pat land, making beer can be more problematic than either wine or cider. In fact, beer is always more difficult than the juice-based drinks because of the nature of the ingredients and the processes involved, but ex-pat conditions can exacerbate even these difficulties. In countries where beer kits are legally sold it's easy. Just buy one and follow the instructions. But where there are no kits, there is almost certainly no source of malted barley or dried hops. Additionally, even if you could source the ingredients, in alcohol-intolerant countries the unavoidable smell of boiling beer wort might easily attract unwanted attention from the authorities, if a neighbour complains.
One solution is to re-ferment commercial nonalcoholic beer which is generally available even in dry countries. Of course, this is not worth considering if real beer is available as it won't save you any money or shopping time and there is just as much to carry. But it is an option and the results can be quite good.
Nonalcoholic beer is conventionally brewed beer with the alcohol removed. In recent years, as the demand for the product has increased, the methods for removing the alcohol have become more sophisticated and do far less damage to the flavour than was previously the case. Probably the best products are German as these are subject to strict laws and must be made from only 4 ingredients: malted barley, hops, yeast and water. They are preservative-free which is essential for our purpose. So, how to proceed? ...
One solution is to re-ferment commercial nonalcoholic beer which is generally available even in dry countries. Of course, this is not worth considering if real beer is available as it won't save you any money or shopping time and there is just as much to carry. But it is an option and the results can be quite good.
Nonalcoholic beer is conventionally brewed beer with the alcohol removed. In recent years, as the demand for the product has increased, the methods for removing the alcohol have become more sophisticated and do far less damage to the flavour than was previously the case. Probably the best products are German as these are subject to strict laws and must be made from only 4 ingredients: malted barley, hops, yeast and water. They are preservative-free which is essential for our purpose. So, how to proceed? ...
Method, for five litres, target ABV = 5%
(For a larger brew, simply scale up all the quantities but don't change the timescale)- Day 1 - Pour 1 small (330 ml) can or bottle of your 0% beer into a glass bowl. Stir in 2 tablespoons granulated sugar. The beer will froth up, which is fine. We want rid of the dissolved CO₂. Add half a teaspoon of dried yeast. Cover and leave in a warmish place.
- Day 2 - Pour 3.3 litres (10 x 330 ml bottles, or equivalent) of 0% beer into a large bowl or bucket. Stir in 450 grams granulated sugar. When the sugar is all dissolved and frothing has subsided, add the fermenting starter from day 1. Cover and leave in a warmish place.
- Day 3 - Pour the fermenting beer through a large funnel into a 5 litre drinking water bottle. Fit the screw-cap but loosely, so that the CO₂ can escape.
- Days 4, 5 - As the head subsides, top up the bottle with more 0% beer to the 5 litre mark (just below the neck). Don't add more sugar. The day 2 addition is all it needs.
- Day 6 or 7 - When bubbling has stopped or slowed to the occasional bubble, tighten the screw-cap and place the bottle in the fridge. This helps the beer to fall clear.
- Day 8 or 9 - Carefully pour the beer into five 1-litre plastic lemonade bottles. Drop one sugar cube into each bottle and cap tightly. Place the bottles in a warmish place for three days then store in a cool, dark place until required. Chill before serving.
Subscribe to:
Posts (Atom)
Most viewed:
-
I've met quite a few folk who've tried to make alcohol by fermenting sugary water. When it doesn't work, they've always got ...
-
I've already described four options for topping up a new wine for storage and maturing. There's a rather ingenious alternative avai...
-
At the end of fermentation, the wine should be separated from the lees (sediment) and stored in a fresh vessel. If you are working with 5-l...